| R2T24W-15 RooTenna - the antenna with a pouch! The R2T24W-15 RooTenna offers a compact, low profile, high performance 15dBi gain antenna coupled with a waterproof compartment to facilitate integration of various customer electronics. The customer's electronic equipment is protected within a 9" x 9" x 2" weatherproof compartment, big enough to house transceivers, access points, routers, amplifiers and other electronic equipment.
The antenna design utilizes a suspended wire element over a solid 8.5" square backplane for consistent performance over temperature and humidity conditions. The weatherproof housing is constructed of UV stabilized ABS plastic and accommodates horizontal or vertical antenna polarity. The backplate is aluminum with stainless steel fasteners for corrosion resistance throughout many years of reliable service. The +/- 45 deg tilt bracket is galvabond steel with stainless steel fasteners.
The R2T24W-15 RooTenna meets Nema 4 and IP65 Waterproofing requirements.
The Senao CB3 + Deluxe (EL-2611CB3-PLUS) with it's high power 200mw radio is legendary for reliability and long distance links. The combination of the Rootenna R2T24W-15 and the NL-2611CB3 Plus Deluxe are a perfect match.
15dBi DATA SHEET
INSTALLATION INSTRUCTIONS
Senao NL-2611 CB3 Plus Deluxe (EL-2611CB3-PLUS) Specifications:
Data Transfer Rate 11, 5.5, 2 and 1 Mbps, Auto Fall-Back
Frequency Band 2.400~2.484 GHz
Modulation 11 Mbps / 5.5 Mbps CCK, 2 Mbps: DQPSK, 1 Mbps: DBPSK
RF Output Power 23dBm(200mW)-FCC
WEP data encryption 64/128-bit
Compatibility IEEE 802.11b compliant
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
Power Supply 12V DC/ 1A
Topology Point-to-Point/ Point-to-Multipoint/ Infrastructure
Interface: One 10Base-T RJ-45 LAN Port
Security MAC address filtering (AP Mode)
WEP encryption (64/128 bit)
Management: Web-based configuration
Temperature Range: 0 to 55C (32F to 131F)- Operating: -20C to 80C(-4F to 176F)- Storage
Humidity (non-condensing) 5%~95% typical
Weight 350 g (0.8 lb.)
Everything included for a complete system. Assembly required. Includes Rootenna, Ubolt for pole mount, passive POE injector, Power Supply, Senao NL-2611 CB3 + Deluxe (EL-2611CB3-PLUS) and RF cable.
CB3 Plus Deluxe notes. Including troubleshooting and a sample point to point configuration. |
