| Manufacturer Part Number: Senao NL-2611CB3 Plus Deluxe Senao SL-2611CB3 Plus Deluxe Senao EL-2611CB3 Plus Deluxe 200mw, EL-2611CB3+ Deluxe
EL-2611CB3+ DELUXE
Long Operating Range 802.11b Client bridge
Low cost CPE for WISP
Easy and Quick Connect your Ethernet Device to Wireless networks
No Driver needed (Plug and Play)
Flexible Access Point locations and cost savings
Power-over-Ethernet capable (additional purchase of EBU-101-01 required)
Data Transfer Rate 11, 5.5, 2 and 1 Mbps, Auto Fall-Back
Frequency Band 2.400~2.484 GHz
Range (open environment) 11 Mbps -300m/450m (23 dBm output power)
5.5 Mbps -400m/600m (23 dBm output power)
2 Mbps -500m/750m ( 23 dBm output power)
1 Mbps -800m/1200m (23 dBm output power)
Radio type Direct Sequence Spread Spectrum (DSSS)
Modulation 11 Mbps / 5.5 Mbps CCK
2 Mbps: DQPSK
1 Mbps: DBPSK
RF Connector TNC Female-Reverse
RF Output Power 23dBm(200mW)-FCC
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
Power Supply 12V DC/ 1A
Topology Point-to-Point/ Point-to-Multipoint/ Infrastructure
Interface One 10Base-T RJ-45 LAN Port
Firmware Upgrade Upgrade firmware via TFTP
Security MAC address filtering (AP Mode)
Hide SSID in beacons, stations can not use "any" SSID (AP Mode)
Temperature Range 0 to 55C (32F to 131F)- Operating
-20C to 80C(-4F to 176F)- Storage
Humidity (non-condensing) 5%~95% typical
Dimensions 125(L)mm * 108(W)mm * 31(H)mm
4.9 (L)in * 4.3(W)in * 1.2(H)in
Weight 350 g (0.8 lb.)
CB3 Plus Deluxe notes. Including troubleshooting and a sample point to point configuration. |
